Carefully clean the appliance and all accessories. Then wait for all parts to be thoroughly dry.
The large 1100 ml cup has a usable capacity of 700 ml. The small 650 ml cup has a usable capacity of 300 ml.
Do not fill the cups beyond the MAX capacity limit.
Do not operate the product empty.
WARNING! RISK OF CUTS! Avoid contact with moving parts. Exercise extreme caution
when handling sharp and moving parts. Hands, hair, clothing, and kitchen utensils
must be kept clear during use. A scraper may only be used once the appliance is switched off, disconnected
from the power supply, and moving parts have completely stopped.
WARNING! This appliance is intended for short-term use only. The appliance must not be
used for more than 60 seconds continuously. Allow the appliance to rest for at least 2 minutes between each cycle.
WARNING! Do not use accessories other than those supplied or recommended by the manufacturer.
WARNING! The cup and blade assembly must be securely attached before operating the appliance.
WARNING! Do not remove the container from the motor unit until the cutting blades have completely
stopped.
WARNING! Do not operate the appliance with an empty container.
WARNING! Allow hot foods and liquids to cool to room temperature before pouring them
into the container.
WARNING! Extremely bulky or hard foods or ingredients should not be processed with
the appliance, to avoid damaging it and the cutting blades.
Note: The appliance is equipped with an integrated safety switch. This switch cuts off the power supply
if the container is disengaged/removed from the motor unit before or during appliance use. The container must be
securely fastened to the motor unit; otherwise, the appliance will not operate.
Note:
- For best results when blending solid foods with liquid, place small
portions of solid food into the container, one at a time, instead of placing a large quantity all at once.
- If processing solid foods, cut them into small pieces (1 to 2 cm) first.
- If blending is not effective, add a small amount of water and repeat the operation.
CARE AND MAINTENANCE
Unplug the appliance and remove all accessories before cleaning.
1. Fill the cups halfway with warm water and a drop of detergent.
2. Place the blade assembly on the cup, install the whole unit on the motor block. Start a blending cycle for 1 to
2 seconds. Repeat this operation 3 to 4 times.
3. Remove the cup, disassemble the blade assembly, and rinse the cup with clear water.
4. For thorough cleaning, wash the cups and lids in the dishwasher or in warm
soapy water.
5. The blade assembly can be cleaned under tap water, with the blades always facing upwards. Do not rinse the
underside of the blade assembly.